Sewage sludge-derived TiO2/Fe/Fe3C-biochar composite as an efficient heterogeneous catalyst for degradation of methylene blue
Md Manik Miana b, Guijian Liua b c✉
- aCAS Key Laboratory of Crust-Mantle Materials and the Environments, School of Earth and Space Sciences, University of Science and Technology of China, Hefei 230026, PR China
- bState Key Laboratory of Loess and Quaternary Geology, Institute of Earth Environment, The Chinese Academy of Sciences, Xi'an, Shaanxi 710075, PR China
- cState Key Laboratory of Loess and Quaternary Geology, Institute of Earth Environment, The Chinese Academy of Sciences, Xi'an, Shaanxi 710075, PR China. Electronic address: lgj@ustc.edu.cn
- ✉Corresponding author
Papers open inside SciRah from the original publisher or repository; SciRah never hosts them.
Abstract
Novel TiO2/Fe/Fe3C-biochar composite, as a heterogeneous catalyst, has been synthesized by a single-step route, where sewage sludge (SS) and different ratios of nanoparticles (NPs: Fe and Ti) impregnated with chitosan using coagulation and flocculation techniques for subsequent thermal decomposition at 800 °C. The physiochemical properties of samples have been characterized thoroughly and employed in methylene blue (MB) degradation tests. It was found that NPs ratio and chitosan support have significant influences on the properties and catalytic activity of catalysts. Chitosan inclusion successfully improves the surface area and mesoporosity of composites, while high contents of Fe integration reduce surface area and active site (Fe3C) due to Fe0 agglomeration. Though, Ti incorporation produces Ti3+ that activated photosensitivity. Catalyst with the high mesoporous surface, Ti3+, selective Fe3C, and small Fe0 shows superior MB removal competency through concurrent adsorption, photodegradation, and H2O2 activation. Primarily OH and some O2- radicles participating in the degradation reactions evident from scavenging experiments. The maximum MB removal capacity evaluated as 376.9 mg L-1 in neutral pH. Moreover, the catalyst exhibits excellent material stability, recyclability, easy separability, and low Fe-ion leaching (0.11 mg L-1) after catalysis. This study provided new insight into a low-cost and environmentally friendly route of catalyst synthesis using SS, NPs, and chitosan, which concurrently advantageous to SS disposal and wastewater treatment.
TL;DRThis study provided new insight into a low-cost and environmentally friendly route of catalyst synthesis using SS, NPs, and chitosan, which concurrently advantageous to SS disposal and wastewater treatment. (Semantic Scholar)