Understanding process force transients with application towards defect detection during friction stir welding of aluminum alloys

Abstract The formation of sub-surface defects during friction stir welding has limited the adoption of the process in high volume production. A potential exists to eliminate/reduce the need for costly post weld inspection of such defects through the development of an in-process defect detection method based on a measured process output. The current state of in-process defect detection consists primarily of applying “black box” methods of correlating process outputs to defect occurrence without a fundamental physical understanding of what is producing the change in the output. This approach constrains the application of such methods when altering any aspect of the friction stir welding process. The current study seeks to provide a fundamental physical explanation as to what is driving the oscillation of friction stir welding process forces at the tool rotational frequency, as well as what is occurring when the tool interacts with defects and the oscillatory process forces are altered. A novel understanding was enabled through the synchronization of force measurements with angular position measurements of tool features. The results suggest that the eccentric motion of the tool and/or the rotation of a slanted shoulder surface are the primary drivers of process force oscillations. A fundamental explanation of the interaction between features on the tool probe and defective volumes has been proposed. The physical understanding helps to explain how altering the process will alter the force transients on which the detection method is based, which will enable a more robust and transferable method.